Westgate Group
Stainless Steel
Temper Rolled
301 (Tension Levelled to ensure Flatness) 302 - 304 - 316
Quarter Hard / Half Hard / Three Quarter Hard / Fully Hard / Extra Hard
Guages
0.10mm x 2.00mm
Annealed
304 - 305 - 309 - 310 - 316 - 316L - 316Ti - 321 - 409 - 410S - 420 - 430 - 434 - 439 - 441
Guages
0.10mm x 10.00mm
Surface Finishes
2B / 2R (BA) / 2D / DP1 / Satin Polish / Mirror Polish / Poly Coated
Any other specification Please do not hesitate to ask
Carbon Spring Steel
EN10132-4 C67S (CS70) C75S (CS70-CS80)
Annealed Or Hardened & Tempered
Mild Steel
EN10139 DC01-DC04 (CS4)
EN10130 DC01-DC04 (CR4)
Mild Steel Galv DX51
Non Ferrous
Aluminium Brass Copper
Available In Coil Or Lengths
Coil forms Pancake Coils
Lengths Slit Widths Cut Into Lengths Required
Stock Width Cut into Lengths
Sheets
Edge Conditions Slit Edge
Safe Edge Dress
Rolled Round Edge Dress
Machined Round Edge Dress
Chamfered Edge
Westgate Coil & Processing Ltd
Tel: 01922 451608
[email protected]
Mark Wyatt [email protected]
Mobile 07854 123245
Vicky Plant [email protected]
Mobile 07949 812805
Westgate Coil & Processing Ltd
Tel: 01922 451608
Westgate Stainless Ltd
Westgate Aluminium Extrusion Ltd
Westgate House, Middlemore Lane West,
Aldridge, West Midlands
WS9 8BG
**Servicing Our Customer Requirements
Since 2006**
Our Stock Range
Stainless Steel Strip | 301/302/304/304L/316/316L/430/420/410/409/321/310s/17/7ph |
Edge conditions | Slit edge/hand safe/round edge |
Hardness | Soft-annealed/hard rolled - all hardness ranges including High Yield |
Coil Forms | Pancake coils/bobbin wound/tension leveled |
Surface Finishes | 2B/2R/2D/DP1/satin polish/mirror polish |
Nickel Alloys | Alloys 200/201/400/600/601/625/718/800/825/c276/k500/x750 |
Thickness | 0.025mm-6.0 mm in coil |
Widths | 3.0mm wide- 1500mm wide |